MOTORIZED ROLLER SHADE
Easy operation-Remote control with cordless design.Dual function-Manual operation is available when it’s out of power.
Please check the size chart before placing the order.
MOUNT: minimum 3 inch depth required for inside mount. In order to accommodate the cordless mechanism, the actual roller blind is 1/2 inch shorter than the listing size and the fabric is 0.9 inch shorter than the headrail on both sides.
Yes, for any custom-made size, please contact us.
The length of this blind only comes with 72'', it cannot be cut to size, however you can stop at any position you want.
Please refer to our product specification on the bottom of product websites, we have 23",27",31",33',35",46"W X 72" L.
Please note that the headrail is shorter by 1/2 inch in order to accommodate the cordless mechanism.
You can choose the type of inside mount or outside mount.
But if you want to install it to the ceiling, you need to consider the height of the window.
The roller shade is made for indoor use, we strongly suggest customer to install indoor. Installing outside may deteriorate the color.
Unfortunately the motoized roller shades cannot be trimmed.
A motorized roller shade comes with a remote control but it can not be setup with a phone app.
Basically, if you buy a motorized roller shade, there's a remote for you to operate the shade. If you buy 3 motorized roller shades, you will need to operate one shade with one remote and keep pressing the button while rolling up or down the shade.
Moreover, we provide 1 to 4 remote to operate 4 shades by a remote. Here's the method to use the 1 to 4 remote control, there are four frequencies in a 1 to 4 remote. You need to assign each frequency to each shade's receiver and operate them one by one. The same way as one frequency remote, you need to keep pressing the button while rolling up or down the shade.
We suggest customers to use one remote to control one shade.
There might be frequency interference occurred when using one remote control multiple shades.
As for the 1 to 4 remote control, please note that there are four frequencies in a 1 to 4 remote control.
You need to assign each frequency to each shade's receiver and operate them one by one. Meanwhile, you need to keep pressing the button while rolling up or down the shade.
After installation, if it works abnormally please make sure the followings,
First, check the direction of the batteries and only use ALKALINE batteries.
Second, make sure the cord inserts into the receiver well.
Third, confirm if it is out of battery.
Please use the dry towel or cleaning duster to clean. Do not disassemble the product and wash
The roller shades use batteries instead of AC power.
The wireless remote control is operated with alkaline batteries and there is no wall power outlet needed.
Limited One Year Warranty from the Date of Purchase.
All of our products are warranted against manufacturer defects in materials or workmanship provided that you are the original purchaser of the product, and the product was installed according to our instructions.
• Normal wear and tear.
• Consumer damages caused by accidents, alterations, abuse of the product, exposure to salt air, misuse, or damages from pets or insects.
• Damages resulting from removal and re-installation in the same or any other window or application, or failure to follow instructions, such as measurement, installation, cleaning, and maintenance.
• Accidental breakage, misuse or other abuse (unless it occurred during shipping)
• Improper cleaning and/or chemical use
• Normal fading over time e.g. material discoloration, yellowing or cracking of plastic parts.
• Wrong measurements are not covered by the warranty and are not refundable.